0xff Backfire-Vienna-Weiterführendes: Unterschied zwischen den Versionen

Aus FunkFeuer Wiki
Wechseln zu: Navigation, Suche
K (→‎3G/UMTS/Modem)
(→‎3G/UMTS/Modem)
Zeile 172: Zeile 172:
  
 
= 3G/UMTS/Modem =
 
= 3G/UMTS/Modem =
−
 
−
'''UNFINISHED!'''
 
  
 
http://wiki.openwrt.org/doc/recipes/3gdongle
 
http://wiki.openwrt.org/doc/recipes/3gdongle
Zeile 181: Zeile 179:
 
opkg install usbutils kmod-usb-serial kmod-usb-serial-option usb-modeswitch usb-modeswitch-data comgt ppp luci-proto-3g sdparm
 
opkg install usbutils kmod-usb-serial kmod-usb-serial-option usb-modeswitch usb-modeswitch-data comgt ppp luci-proto-3g sdparm
 
</pre>
 
</pre>
 +
 +
Config, nur kleine Änderungen zu den Originalscripts
 +
 +
Testdongle: ZTE MF680 (bis zu 42Mbit)
 +
 +
vim /etc/config/network
 +
 
<pre>
 
<pre>
−
Installing kmod-usb-serial (2.6.39.4-1) to root...
+
config 'interface' 'wan2' 
−
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/kmod-usb-serial_2.6.39.4-1_ar71xx.ipk.
+
        option 'ifname'  'ppp0'
−
Multiple packages (kernel and kernel) providing same name marked HOLD or PREFER. Using latest.
+
        option 'pincode' 'XXXX'   
−
Multiple packages (kernel and kernel) providing same name marked HOLD or PREFER. Using latest.
+
        option 'device'  '/dev/ttyUSB2'
−
Upgrading kernel on root from 2.6.39.4-1-0b90198be7e45fba2319795f4a8dd3ad to 2.6.39.4-1-937f5480fc4be62c7bf5eb4a7622935a...
+
        option 'apn'    'XXX.at'
−
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/kernel_2.6.39.4-1-937f5480fc4be62c7bf5eb4a7622935a_ar71xx.ipk.
+
        option 'service' 'umts'
−
Installing kmod-usb-serial-option (2.6.39.4-1) to root...
+
        option 'proto'  '3g' 
−
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/kmod-usb-serial-option_2.6.39.4-1_ar71xx.ipk.
+
−
Multiple packages (kernel and kernel) providing same name marked HOLD or PREFER. Using latest.
+
−
Multiple packages (kernel and kernel) providing same name marked HOLD or PREFER. Using latest.
+
−
Installing kmod-usb-serial-wwan (2.6.39.4-1) to root...
+
−
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/kmod-usb-serial-wwan_2.6.39.4-1_ar71xx.ipk.
+
−
Installing usb-modeswitch (1.2.0-2) to root...
+
−
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/usb-modeswitch_1.2.0-2_ar71xx.ipk.
+
−
Installing libusb (0.1.12-2) to root...
+
−
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/libusb_0.1.12-2_ar71xx.ipk.
+
−
Installing usb-modeswitch-data (20111023-1) to root...
+
−
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/usb-modeswitch-data_20111023-1_ar71xx.ipk.
+
−
Installing comgt (0.32-9) to root...
+
−
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/comgt_0.32-9_ar71xx.ipk.
+
−
Installing chat (2.4.5-4) to root...
+
−
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/chat_2.4.5-4_ar71xx.ipk.
+
−
Installing ppp (2.4.5-4) to root...
+
−
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/ppp_2.4.5-4_ar71xx.ipk.
+
−
Multiple packages (kernel and kernel) providing same name marked HOLD or PREFER. Using latest.
+
−
Multiple packages (kernel and kernel) providing same name marked HOLD or PREFER. Using latest.
+
−
Installing kmod-ppp (2.6.39.4-1) to root...
+
−
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/kmod-ppp_2.6.39.4-1_ar71xx.ipk.
+
−
Installing kmod-lib-crc-ccitt (2.6.39.4-1) to root...
+
−
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/kmod-lib-crc-ccitt_2.6.39.4-1_ar71xx.ipk.
+
−
Configuring kernel.
+
−
Configuring chat.
+
−
Configuring kmod-lib-crc-ccitt.
+
−
Configuring kmod-usb-serial.
+
−
Configuring kmod-usb-serial-wwan.
+
−
Configuring kmod-usb-serial-option.
+
−
Configuring comgt.
+
−
Configuring libusb.
+
−
Configuring usb-modeswitch.
+
−
Configuring kmod-ppp.
+
 
</pre>
 
</pre>
 +
 +
vim /etc/chatscripts/3g.chat
 +
 +
<pre>
 +
ABORT  BUSY
 +
ABORT  'NO CARRIER'
 +
ABORT  ERROR
 +
REPORT  CONNECT
 +
TIMEOUT 10
 +
""      "AT&F"
 +
OK      "ATE1"
 +
OK      'AT+CGDCONT=1,"IP","$USE_APN"'
 +
SAY    "Calling UMTS/GPRS"
 +
TIMEOUT 30
 +
OK      "ATD*99#"
 +
CONNECT ' '
 +
</pre>
 +
  
 
  zurück zu wiki_funkfeuer_at<br>
 
  zurück zu wiki_funkfeuer_at<br>

Version vom 26. Januar 2012, 01:06 Uhr

Tunnel Setup

siehe Tunnel_Setup oder auch Tunnel_Setup_-_Backfire_Vienna_2.0


OpenVPN für das private Netz

siehe OpenVPN_für_das_private_Netz


Server ohne olsr

siehe Server_ohne_olsr


OLSR-Konfiguration

siehe OLSR-Konfiguration


MobileNodes

siehe MobileNodes


IRC Chat

siehe IRC


VoIP Client

siehe VoIP_Client_Konfiguration


Services

siehe Services


Unix Tipps

siehe Unix_tips


Port Scans

siehe Port_Scans


zusätzl. Packages installieren

siehe 0xff_Backfire-Vienna-Packages


USB

z.b. am TP-Link TL WR-1043ND

http://wiki.openwrt.org/tag/usbrelated?do=showtag&tag=tag%3Ausbrelated

http://wiki.openwrt.org/doc/howto/usb.essentials

Pakete installieren 

 opkg install kmod-usb-core kmod-usb-ohci kmod-usb-uhci kmod-usb2 usbutils


GPS (+NTP)

http://gpsd.berlios.de/gpsd.html

http://h-wrt.com/de/doc/gps

Pakete installieren 

 opkg install kmod-usb-serial kmod-usb-serial-option kmod-usb-serial-pl2303 gpsd

Zusätzliche usb-serial Treiber nach Bedarf... kmod-usb-serial-*

Parameter -n entfernen in /etc/init.d/gpsd 

 $PROG -P $PIDF -S $port $device

Tools zum Testen: 

 cgps <IP>:<PORT>
 xgps <IP>:<PORT>
 telnet  <IP>:<PORT>

Bei telnet z.b. ?DEVICE; als Befehl eingeben.

Um von einer externen IP zugreifen zu können, muss der gpsd mit -G gestartet werden: 

 gpsd -G /dev/ttyUSB


NTP

Zeitsync mit NTPD

Folgendes funktioniert nur, wenn der gpsd von einer anderen Applikation gepollt wird. Die Option -n des gpsd macht Probleme.

http://gpsd.berlios.de/gpsd.html

Pakete installieren 

 opkg install ntpd

Mindestens einen Server + GPS konfigurieren in /etc/ntp.conf 

# use a random selection of 8 public stratum 2 servers
# see http://twiki.ntp.org/bin/view/Servers/NTPPoolServers

#restrict default nomodify notrap noquery
#restrict default noquery


restrict 127.0.0.1

driftfile  /tmp/ntp.drift

server 0.openwrt.pool.ntp.org iburst
#server 1.openwrt.pool.ntp.org iburst
#server 2.openwrt.pool.ntp.org iburst
#server 3.openwrt.pool.ntp.org iburst


# GPS(NMEA)+PPS
#server 127.127.20.0 minpoll 4 prefer
#fudge 127.127.20.0 flag3 1 flag2 0

# SMA PPS
#server 127.127.28.0 minpoll 4 prefer
#fudge 127.127.28.0 refid PPS flag3 1

server 127.127.28.0 minpoll 4 maxpoll 4
fudge 127.127.28.0 time1 0.035 refid GPS  flag3 1

server 127.127.28.1 minpoll 4 maxpoll 4 prefer
fudge 127.127.28.1 refid GPS1 flag3 1

#server 192.168.1.253

Tools zum testen: 

 ntpq -p

Output etwa wie folgt: 

     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
+173-8-103-244-M 18.26.4.105      2 u   24   64  311  165.747    5.503  32.117
*SHM(0)          .GPS.            0 l    5   16  377    0.000   16.266  21.334
 SHM(1)          .GPS1.           0 l    -   16    0    0.000    0.000   0.000


STORAGE

http://wiki.openwrt.org/doc/howto/usb.storage

Pakete installieren 

 opkg install kmod-scsi-core kmod-usb-storage kmod-usb-storage-extras block-mount kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1

Zusätzliche Filesysteme nach Bedarf... kmod-fs-*


3G/UMTS/Modem

http://wiki.openwrt.org/doc/recipes/3gdongle

Pakete installieren 

opkg install usbutils kmod-usb-serial kmod-usb-serial-option usb-modeswitch usb-modeswitch-data comgt ppp luci-proto-3g sdparm

Config, nur kleine Änderungen zu den Originalscripts

Testdongle: ZTE MF680 (bis zu 42Mbit)

vim /etc/config/network 

config 'interface' 'wan2'   
        option 'ifname'  'ppp0'
        option 'pincode' 'XXXX'    
        option 'device'  '/dev/ttyUSB2'
        option 'apn'     'XXX.at'
        option 'service' 'umts'
        option 'proto'   '3g'

vim /etc/chatscripts/3g.chat 

ABORT   BUSY
ABORT   'NO CARRIER'
ABORT   ERROR
REPORT  CONNECT
TIMEOUT 10
""      "AT&F"
OK      "ATE1"
OK      'AT+CGDCONT=1,"IP","$USE_APN"'
SAY     "Calling UMTS/GPRS"
TIMEOUT 30
OK      "ATD*99#"
CONNECT ' '



zurück zu wiki_funkfeuer_at

< Startseite > < Backfire-Vienna > < Standards > < Installation > < Weiterführendes > < Aktivitäten > < Index >

<google>WIKI</google>

Von „https://oldwiki.funkfeuer.at/index.php?title=0xff_Backfire-Vienna-Weiterführendes&oldid=12384“