Testbed-questions: Unterschied zwischen den Versionen

Aus FunkFeuer Wiki
Wechseln zu: Navigation, Suche
(en_* pls)
(new experiments)
Zeile 5: Zeile 5:
 
== Questions for tests in the CONFINE testbed ==
 
== Questions for tests in the CONFINE testbed ==
  
{| border="3" cellpadding="10" cellspacing="0"
+
{| border="2" cellpadding="10" cellspacing="0"
! Testname || Description ||  Indoor (I)/Outdoor (O) || Requirements
+
! Testname || Description ||  Indoor (I)/Outdoor (O) || Requirements || Proposed by
 
|-
 
|-
| noise-level || Use all Wifi cards to measure the noise level in a city wide mesh network. Aggregate the data. Average over time. The idea is to create a baseline of measurements which serve as a comparison for other measurements || O || identical Wi-Fi cards in each outdoor router
+
| noise-level || Use all Wifi cards to measure the noise level in a city wide mesh network. Aggregate the data. Average over time. The idea is to create a baseline of measurements which serve as a comparison for other measurements || O || identical Wi-Fi cards in each outdoor router || aaron (FF)
 +
|-
 +
| better metrics || first start of with the current default OLSR metric, then successively implement and test different metrics which factor in SNR, biterror rate, bandwidth capacity, latency, packetloss, compare these metrics and chart them against each other. Compare the metric measurements by "optimal routing" (i.e. max flow; max-flow implemented by manual setting of routes). Compare with literature and compare why which measurement in the scientific literature produced different results || O || reasonably dispersed outdoor network, different Wi-Fi cards, different HW, multi-channel nodes || aaron (FF)
 +
|-
 +
| auto-freq-selection || compare different frequency planning- and -selection algorithms from literature. Implement them and test them and compare them. Compare against maximum theoretical throughput || O || reasonably dispersed outdoor network, different Wi-Fi cards, different HW, multi-channel nodes || aaron (FF)
 
|-
 
|-
 
|}
 
|}

Version vom 10. November 2011, 17:20 Uhr

Please use english so that others in the world have a chance to read this page and to learn from us.


Questions for tests in the CONFINE testbed

Testname Description Indoor (I)/Outdoor (O) Requirements Proposed by
noise-level Use all Wifi cards to measure the noise level in a city wide mesh network. Aggregate the data. Average over time. The idea is to create a baseline of measurements which serve as a comparison for other measurements O identical Wi-Fi cards in each outdoor router aaron (FF)
better metrics first start of with the current default OLSR metric, then successively implement and test different metrics which factor in SNR, biterror rate, bandwidth capacity, latency, packetloss, compare these metrics and chart them against each other. Compare the metric measurements by "optimal routing" (i.e. max flow; max-flow implemented by manual setting of routes). Compare with literature and compare why which measurement in the scientific literature produced different results O reasonably dispersed outdoor network, different Wi-Fi cards, different HW, multi-channel nodes aaron (FF)
auto-freq-selection compare different frequency planning- and -selection algorithms from literature. Implement them and test them and compare them. Compare against maximum theoretical throughput O reasonably dispersed outdoor network, different Wi-Fi cards, different HW, multi-channel nodes aaron (FF)