Benutzer:Peerco: Unterschied zwischen den Versionen
Aus FunkFeuer Wiki
Peerco (Diskussion | Beiträge) (→Misc) |
Peerco (Diskussion | Beiträge) (→Fonera) |
||
Zeile 145: | Zeile 145: | ||
* [http://wiki.freifunk-hannover.de/Fonera_mit_OLSR Fonera mit OLSR] | * [http://wiki.freifunk-hannover.de/Fonera_mit_OLSR Fonera mit OLSR] | ||
* [http://download.berlin.freifunk.net/fonera/ fonera] | * [http://download.berlin.freifunk.net/fonera/ fonera] | ||
+ | * [[Fonera]] | ||
== Misc == | == Misc == |
Version vom 7. Januar 2011, 20:53 Uhr
Inhaltsverzeichnis
Nodes
Servers
Hardware
- WRAP Wireless Router Application Platform
Software
- Nullsoft (Streaming|S as in Soft) Video
- The Winamp TV - NSV - NullSoft Video Streaming Resource
- MPeX.net - MP3 Software, Downloads, Hardware, Anleitungen, Winamp
- Qemu Manager
- Windows Mobile OLSR Daemon
- OLSR for Windows 2000 and Pocket PC
Docs
OpenVPN tunnel
- http://ipkg.funkfeuer.at/autoupdate/freifunk-openwrt-autoupdate-1.7.4.8-0xff-markit-full.trx
- http://ipkg.funkfeuer.at/ipkg/1.6/0xff-openvpn-webif_1.5.3_mipsel.ipk
leider ließ sich http://ipkg.funkfeuer.at/ipkg/1.7/0xff-openvpn-webif_1.7.1_mipsel.ipk nicht installieren
ipkg remove tcpdump
ipkg remove freifunk-tcpdump
ipkg install freifunk-tcpdump
root@gru3ost:~# cat /etc/init.d/S42openvpn [..] #create OpenVPN config cat>$CONFIG_DIR/$VPN_IF.conf<<EOM dev $VPN_IF proto $ff_openvpn_proto remote $ff_openvpn_host port $ff_openvpn_port ifconfig $ff_openvpn_ip $ff_openvpn_netmask route-up /etc/openvpn/openvpn-webif-route-up.sh up /etc/openvpn/openvpn-webif-if-up.sh down /etc/openvpn/openvpn-webif-if-down.sh up-restart
comp-lzo script-security 2
verb 3 EOM [..]
root@gru3ost:~# cat /etc/init.d/S45firewall [..] ins_nat() { LANNAT= case $WIFIDEV in "");;*)case $LANDEV in "");;*)if ! in_range $LANADR/$LA NPRE;then use_nat # Setup alias and dest nat for an ethernet DMZ PC, e.g. # 172.31.255.254 on WLAN -> DMZ PC which has 192.168.1.2 # Also add to olsrd.conf: "HNA4 172.31.255.254 255.255.255.255" IFS=\; devnum=0 for dmz in $(nvram get ff_dmz); do src=${dmz%[:,]*} dst=${dmz#*[:,]} ip addr add dev $WIFIDEV $src/32 label $WIFIDEV:$devnum iptables -t nat -I PREROUTING -d $src -j DNAT --to $dst iptables -I FORWARD -s ! $LANNET/$LANPRE -d $dst -j ACCE PT iptables -I FORWARD -s $dst -d ! $LANNET/$LANPRE -j ACCE PT iptables -I OUTPUT -o lo -s $src -d $src -j ACCEPT iptables -I INPUT -i lo -s $src -j ACCEPT devnum=$(( $devnum + 1 )) done unset IFS case $LANADR in "") LANNAT=192.168.0.0/16 ;;*) LANNAT=$LANNET/$LANPRE ;;esac iptables -t nat -I POSTROUTING -o $WIFIDEV -s $LANNAT -d ! $LANN AT -j MASQUERADE
iptables -t nat -I POSTROUTING -o tap0 -s $LANNAT -d ! $LANNAT - j MASQUERADE
fi;;esac;;esac # Mask packets from these WLAN DHCP clients, so they can do # inet w/o OLSR unless HNA4 is to be used to accomplish this case $(nvram get ff_wldhcp_hna4) in 1);;*) ff_wldhcp=$(nvram get ff_wldhcp) case $ff_wldhcp in "");;*) use_nat IFS=\; for wldhcp in $ff_wldhcp; do iptables -t nat -I POSTROUTING -s ${wldhcp%[:,]* } -j MASQUERADE done unset IFS ;;esac ;;esac case $WANDEV in "");;*)if in_range $WANADR/$WANPRE;then case $LANNAT in "");;*) iptables -t nat -I POSTROUTING -o $WANDEV -s $LANNAT -d ! $LANNAT -j MASQUERADE ;;esac else use_nat iptables -t nat -I POSTROUTING -o $WANDEV -j MASQUERADE fi;;esac } [..]