Benutzer:Peerco: Unterschied zwischen den Versionen

Version vom 29. Dezember 2010, 14:50 Uhr

Nodes

• gru3 roof on the 5th floor
• gru3ost base fallback tunnel kryptavpn

Servers

• p4.dev0 web foto video
• p4.dev0 12kbps 32kHz stereo aacp stream (winamp5)
• wrap.dev0

Hardware

• WRAP Wireless Router Application Platform

Software

• Nullsoft (Streaming|S as in Soft) Video
• The Winamp TV - NSV - NullSoft Video Streaming Resource
• MPeX.net - MP3 Software, Downloads, Hardware, Anleitungen, Winamp
• Qemu Manager
• Windows Mobile OLSR Daemon

Docs

• OpenWrt Buildroot

OpenVPN tunnel

• http://ipkg.funkfeuer.at/autoupdate/freifunk-openwrt-autoupdate-1.7.4.8-0xff-markit-full.trx
• http://ipkg.funkfeuer.at/ipkg/1.6/0xff-openvpn-webif_1.5.3_mipsel.ipk

leider ließ sich http://ipkg.funkfeuer.at/ipkg/1.7/0xff-openvpn-webif_1.7.1_mipsel.ipk nicht installieren

ipkg remove tcpdump
ipkg remove freifunk-tcpdump
ipkg install freifunk-tcpdump

root@gru3ost:~# cat /etc/init.d/S42openvpn

[..]

#create OpenVPN config

cat>$CONFIG_DIR/$VPN_IF.conf<<EOM
dev             $VPN_IF
proto           $ff_openvpn_proto
remote          $ff_openvpn_host
port            $ff_openvpn_port
ifconfig        $ff_openvpn_ip $ff_openvpn_netmask
route-up        /etc/openvpn/openvpn-webif-route-up.sh
up              /etc/openvpn/openvpn-webif-if-up.sh
down            /etc/openvpn/openvpn-webif-if-down.sh
up-restart

comp-lzo
script-security 2

verb 3
EOM

[..]

root@gru3ost:~# cat /etc/init.d/S45firewall

[..]

ins_nat() {
        LANNAT=
        case $WIFIDEV in "");;*)case $LANDEV in "");;*)if ! in_range $LANADR/$LA
NPRE;then
                use_nat

                # Setup alias and dest nat for an ethernet DMZ PC, e.g.
                # 172.31.255.254 on WLAN -> DMZ PC which has 192.168.1.2
                # Also add to olsrd.conf: "HNA4 172.31.255.254 255.255.255.255"
                IFS=\;
                devnum=0
                for dmz in $(nvram get ff_dmz); do
                        src=${dmz%[:,]*}
                        dst=${dmz#*[:,]}
                        ip addr add dev $WIFIDEV $src/32 label $WIFIDEV:$devnum
                        iptables -t nat -I PREROUTING -d $src -j DNAT --to $dst
                        iptables -I FORWARD -s ! $LANNET/$LANPRE -d $dst -j ACCE
PT
                        iptables -I FORWARD -s $dst -d ! $LANNET/$LANPRE -j ACCE
PT
                        iptables -I OUTPUT -o lo -s $src -d $src -j ACCEPT
                        iptables -I INPUT -i lo -s $src -j ACCEPT
                        devnum=$(( $devnum + 1 ))
                done
                unset IFS

                case $LANADR in "")
                        LANNAT=192.168.0.0/16
                ;;*)
                        LANNAT=$LANNET/$LANPRE
                ;;esac
                iptables -t nat -I POSTROUTING -o $WIFIDEV -s $LANNAT -d ! $LANN
AT -j MASQUERADE

                iptables -t nat -I POSTROUTING -o tap0 -s $LANNAT -d ! $LANNAT -
j MASQUERADE

        fi;;esac;;esac

        # Mask packets from these WLAN DHCP clients, so they can do
        # inet w/o OLSR unless HNA4 is to be used to accomplish this
        case $(nvram get ff_wldhcp_hna4) in 1);;*)
                ff_wldhcp=$(nvram get ff_wldhcp)
                case $ff_wldhcp in "");;*)
                        use_nat
                        IFS=\;
                        for wldhcp in $ff_wldhcp; do
                                iptables -t nat -I POSTROUTING -s ${wldhcp%[:,]*
} -j MASQUERADE
                        done
                        unset IFS
                ;;esac
        ;;esac
        case $WANDEV in "");;*)if in_range $WANADR/$WANPRE;then
                case $LANNAT in "");;*)
                        iptables -t nat -I POSTROUTING -o $WANDEV -s $LANNAT -d
! $LANNAT -j MASQUERADE
                ;;esac
        else
                use_nat
                iptables -t nat -I POSTROUTING -o $WANDEV -j MASQUERADE
        fi;;esac
}

[..]

Misc