802.11: Unterschied zwischen den Versionen
Aus FunkFeuer Wiki
| Zeile 1: | Zeile 1: | ||
siehe: http://de.wikipedia.org/wiki/802.11 --lst20060413 | siehe: http://de.wikipedia.org/wiki/802.11 --lst20060413 | ||
---- | ---- | ||
| + | |||
| + | Für Funkfeuer interessant: | ||
| + | |||
| + | == Funkstandards == | ||
| + | |||
| + | * [[802.11a]] | ||
| + | **[[5Ghz]] max. 1000mW [[EIRP]] | ||
| + | ** max. Bruttobandbreite: 54Mbit/s | ||
| + | ** kompatibel mit 802.11h | ||
| + | |||
| + | * [[802.11b]] | ||
| + | **[[2.4Ghz]], max. 100mW [[EIRP]] | ||
| + | ** max. Bruttobandbreite: 11Mbit/s | ||
| + | ** kompatibel mit 802.11g | ||
| + | |||
| + | * [[802.11g]] | ||
| + | **[[2.4Ghz]], max. 100mW [[EIRP]] | ||
| + | ** max. Bruttobandbreite: 54Mbit/s | ||
| + | ** kompatibel mit 802.11b | ||
| + | |||
| + | * [[802.11h]] (europäische a-Variante mit speziellen Auflagen) | ||
| + | **[[5Ghz]], max. 1000mW [[EIRP]] | ||
| + | ** max. Bruttobandbreite: 54Mbit/s | ||
| + | ** kompatibel mit 802.11a | ||
| + | |||
| + | * [[802.11n]] | ||
| + | **[[2.4Ghz]], max. 100mW [[EIRP]] '''und/oder''' | ||
| + | **[[5Ghz]], max. 1000mW [[EIRP]] | ||
| + | ** max. Bruttobandbreite: 600Mbit/s | ||
| + | ** kompatibel mit 802.11b/g '''und/oder''' 802.11a/h | ||
| + | ** [[IEEE-Standard]]-Zertifizierung noch nicht abgeschlossen ([[Draft 2.0]]) | ||
| + | ** Voraussichtlicher Abschluss des Standardentwurfs: Juni 2009 | ||
| + | ** [[MIMO]]-Technologie | ||
| + | |||
| + | |||
| + | == Standard für Adhoc-Meshing == | ||
| + | |||
| + | * [[802.11s]] | ||
| + | |||
| + | == Standard für [[QOS]] == | ||
| + | |||
| + | * [[802.11p]] | ||
Version vom 2. Februar 2009, 16:50 Uhr
siehe: http://de.wikipedia.org/wiki/802.11 --lst20060413
Für Funkfeuer interessant:
Funkstandards
- 802.11h (europäische a-Variante mit speziellen Auflagen)